|
|
|
Serial 端口已打开
|
|
|
|
console:/ $
|
|
console:/ $
|
|
console:/ $
|
|
console:/ $ logcat -v time > sdcard/log.txt
|
|
^C
|
|
130|console:/ $ reboot
|
|
[ 250.780887][ T1095] sprdwl:wlan_delba_event: NOT FOUND sta_lut_index: 6, tid: 0
|
|
[ 250.789281][ T1095] sprdwl:wlan_delba_event: NOT FOUND sta_lut_index: 6, tid: 6
|
|
[ 250.797594][ T1095] sprdwl:sprdwl_fc_add_share_credit, 552, mode:1 closed, index:0, share it
|
|
[ 250.807247][ T17] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 2
|
|
[ 250.838063][ T1139] unisoc_wifi unisoc_wifi wlan0: sprdwl_cfg80211_del_key key index 0 is empty!
|
|
[ 250.849727][ T1139] unisoc_wifi unisoc_wifi wlan0: sprdwl_cfg80211_del_key key index 2 is empty!
|
|
[ 250.859747][ T1139] unisoc_wifi unisoc_wifi wlan0: sprdwl_cfg80211_del_key key index 3 is empty!
|
|
[ 250.869656][ T1139] unisoc_wifi unisoc_wifi wlan0: sprdwl_cfg80211_del_key key index 4 out of bounds!
|
|
[ 250.880101][ T1139] unisoc_wifi unisoc_wifi wlan0: sprdwl_cfg80211_del_key key index 5 out of bounds!
|
|
[ 251.049070][ T1462] audit: rate limit exceeded
|
|
Gatekeeper_TA_DestroyEntryPoint
|
|
[ 252.882251][ T3685] audit: rate limit exceeded
|
|
[ 253.004067][ T1] sysrq: Show backtrace of all active CPUs
|
|
[ 253.010582][ T1] sysrq: Show Blocked State
|
|
[ 253.015736][ T1] sysrq: Kill All Tasks
|
|
[ 253.127215][ T1] restart_deal(): unkown arg 'shell'
|
|
[ 253.149962][ T1] [ohci3-controller]: ohci shutdown start
|
|
[ 253.156275][ T1] [ohci3-controller]: ohci shutdown end
|
|
[ 253.162383][ T1] [ohci2-controller]: ohci shutdown start
|
|
[ 253.168680][ T1] [ohci2-controller]: ohci shutdown end
|
|
[ 253.174781][ T1] [ohci1-controller]: ohci shutdown start
|
|
[ 253.181104][ T1] [ohci1-controller]: ohci shutdown end
|
|
[ 253.187206][ T1] [ohci0-controller]: ohci shutdown start
|
|
[ 253.193503][ T1] [ohci0-controller]: ohci shutdown end
|
|
[ 253.199620][ T1] [ehci3-controller]: ehci shutdown start
|
|
[ 253.205914][ T1] [ehci3-controller]: ehci shutdown end
|
|
[ 253.212020][ T1] [ehci2-controller]: ehci shutdown start
|
|
[ 253.218332][ T1] [ehci2-controller]: ehci shutdown end
|
|
[ 253.224435][ T1] [ehci1-controller]: ehci shutdown start
|
|
[ 253.230725][ T1] [ehci1-controller]: ehci shutdown end
|
|
[ 253.236829][ T1] [ehci0-controller]: ehci shutdown start
|
|
[ 253.243124][ T1] [ehci0-controller]: ehci shutdown end
|
|
[ 253.249214][ T1] sdiohal:[sdiohal_shutdown]enter
|
|
[ 253.254715][ T1] bt_tx_powerchange channel 3 is_resume 0 need_indicate_cp2_woble 0
|
|
[ 253.254719][ T1] bt_tx_powerchange is_resume =0
|
|
[ 253.263589][ T1] hci_disconnect start
|
|
[ 253.273414][ T1] 10 00 13
|
|
[ 253.276667][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.284726][ T1] hci_cmd_send_sync ---
|
|
[ 253.289280][ T1] mmsg[4]=16
|
|
[ 253.292725][ T1] mmsg[5]=0
|
|
[ 253.296070][ T1] hci_disconnect end
|
|
[ 253.300291][ T1] suspen_disconnect2
|
|
[ 253.304528][ T1] class_dis start
|
|
[ 253.308467][ T1] 00 00 13
|
|
[ 253.311743][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.319748][ T1] hci_cmd_send_sync ---
|
|
[ 253.324276][ T1] class_dis mmsg[4]=0
|
|
[ 253.328606][ T1] class_dis mmsg[5]=0
|
|
[ 253.332926][ T1] class_dis end
|
|
[ 253.336661][ T1] bt_tx_powerchange classic_disconnect
|
|
[ 253.342643][ T1] hci_cleanup_wakeup_list start
|
|
[ 253.347939][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.355923][ T1] hci_cmd_send_sync ---
|
|
[ 253.360446][ T1] hci_cleanup_wakeup_list end
|
|
[ 253.365553][ T1] hci_add_device_to_wakeup_list_rtk start demo
|
|
[ 253.372331][ T1] hci_add_device_to_wakeup_list_rtk 0530_1 demo
|
|
[ 253.379199][ T1] FF FF FF FF FF FF FF 10 00 00 02 01 FF 01 00 00 00 0B FF FF
|
|
[ 253.387445][ T1] FF 41 6D 6C 6F 67 69 63 01 01 FF 0C 00 00 00 06 2F 73 15 03
|
|
[ 253.395682][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.403211][ T1] hci_cmd_send_sync ---
|
|
[ 253.407762][ T1] hci_add_device_to_wakeup_list_rtk end
|
|
[ 253.413852][ T1] hci_add_device_to_wakeup_list start demo
|
|
[ 253.420234][ T1] hci_add_device_to_wakeup_list 0612 demo
|
|
[ 253.426519][ T1] FF FF FF FF FF FF FF 10 00 00 01 01 FF 00 00 00 00 06 0F FF
|
|
[ 253.434781][ T1] 00 11 22 33 64 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
|
|
[ 253.443048][ T1] 00 00 00 00 00 00 00 00 00
|
|
[ 253.448057][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.455914][ T1] hci_cmd_send_sync ---
|
|
[ 253.460444][ T1] hci_add_device_to_wakeup_list end
|
|
[ 253.466142][ T1] hci_set_scan_parameters start
|
|
[ 253.471451][ T1] 00 00 01 01 40 06 20 02
|
|
[ 253.476171][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.484666][ T1] hci_cmd_send_sync ---
|
|
[ 253.489195][ T1] hci_set_scan_parameters end
|
|
[ 253.494304][ T1] hci_set_scan_enable start
|
|
[ 253.499218][ T1] 01 00 00 00 00 00
|
|
[ 253.503351][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.511002][ T1] hci_cmd_send_sync ---
|
|
[ 253.515531][ T1] hci_set_scan_enable end
|
|
[ 253.520247][ T1] +++bt_tx_powerchange add device wakeup
|
|
[ 253.526530][ T1] hci_set_ap_sleep_mode start
|
|
[ 253.531641][ T1] 01 00 00 00 00
|
|
[ 253.535477][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.543434][ T1] hci_cmd_send_sync ---
|
|
[ 253.547963][ T1] hci_set_ap_sleep_mode end
|
|
[ 253.552880][ T1] hci_set_ap_start_sleep start
|
|
[ 253.558087][ T1] 40 1F
|
|
[ 253.561036][ T1] hci_cmd_send_sync max_len=258+++
|
|
[ 253.569593][ T345] mtty_close device success _test!
|
|
[ 253.569600][ T1] hci_cmd_send_sync ---
|
|
[ 253.575199][ T345] bluetooth_set_power: start_block=1
|
|
[ 253.579712][ T1] hci_set_ap_start_sleep end
|
|
[ 253.585499][ T345] CPU: 2 PID: 345 Comm: sdiohal_rx_thre Tainted: G O 5.4.125+ #10
|
|
[ 253.600564][ T345] Hardware name: sun50iw9 (DT)
|
|
[ 253.605759][ T345] Call trace:
|
|
[ 253.609306][ T345] dump_backtrace.cfi_jt+0x0/0x4
|
|
[ 253.614703][ T345] dump_stack+0xbc/0x104
|
|
[ 253.619423][ T345] marlin_set_power+0x2c/0x78c [uwe5621_bsp_sdio]
|
|
[ 253.626546][ T345] stop_marlin+0x64/0xc4 [uwe5621_bsp_sdio]
|
|
[ 253.633029][ T345] bluetooth_set_power+0x3c/0x70 [sprdbt_tty]
|
|
[ 253.639702][ T345] rx_data_recv+0x5e8/0x6cc [sprdbt_tty]
|
|
[ 253.645888][ T345] mtty_recv+0x18/0x24 [sprdbt_tty]
|
|
[ 253.651585][ T345] marlin_sdio_rx_cb+0xb8/0x19c [sprdbt_tty]
|
|
[ 253.658219][ T345] sdiohal_rx_list_dispatch+0x1c4/0x2f4 [uwe5621_bsp_sdio]
|
|
[ 253.666225][ T345] sdiohal_rx_thread+0x674/0x850 [uwe5621_bsp_sdio]
|
|
[ 253.673478][ T345] kthread+0x140/0x178
|
|
[ 253.677894][ T345] ret_from_fork+0x10/0x18
|
|
[ 253.682729][ T345] WCN: marlin power state:5, subsys: [MARLIN_BLUETOOTH] power 1
|
|
[ 253.691162][ T345] WCN: marlin have open, GNSS is closed
|
|
[ 253.697248][ T345] bluetooth_set_power: end_block=1
|
|
[ 253.703822][ T1] sdiohal:sdiohal_shutdown pm_flags=0x5, caps=0x1f030d
|
|
[ 253.711732][ T1] mtty_shutdown
|
|
[ 253.715497][ T1] WCN: marlin_shutdown end
|
|
[ 253.794998][ T1] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
|
|
[ 253.809531][ T1] FD650: _fd650_suspend:::close LED FD650
|
|
[ 253.819591][ T1] FD650: _fd650_suspend:::gpio_free MOD_NAME_CLK and MOD_NAME_DAT
|
|
[ 253.828474][ T1] reboot: Restarting system with command 'shell'
|
|
[49]HELLO! BOOT0 is starting!
|
|
[52]BOOT0 commit : 4b34f2890a
|
|
[55]set pll start
|
|
[57]periph0 has been enabled
|
|
[60]set pll end
|
|
[63]unknow PMU
|
|
[65]unknow PMU
|
|
[69]PMU: AXP1530
|
|
[73]dram return write ok
|
|
[76]board init ok
|
|
[77]rtc[2] value = 0xf
|
|
[80]enable_jtag
|
|
[81]DRAM BOOT DRIVE INFO: V0.651
|
|
[85]the chip id is 0x2000
|
|
[87]chip id check OK
|
|
[90]DRAM_VCC set to 1100 mv
|
|
[93]DRAM CLK =696 MHZ
|
|
[95]DRAM Type =8 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)
|
|
[107]Actual DRAM SIZE =2048 M
|
|
[110]DRAM SIZE =2048 MBytes, para1 = 310a, para2 = 8000000, dram_tpr13 = 2006c61
|
|
[124]DRAM simple test OK.
|
|
[126]rtc standby flag is 0x0, super standby flag is 0x0
|
|
[131]dram size =2048
|
|
[134]Use rtc to store dram tuning para
|
|
[138]card no is 2
|
|
[140]sdcard 2 line count 8
|
|
[143][mmc]: mmc driver ver 2021-10-12 13:56
|
|
[147][mmc]: b mmc 2 bias 4
|
|
[155][mmc]: Wrong media type 0x0, but host sdc2, try mmc first
|
|
[161][mmc]: ***Try MMC card 2***
|
|
[187][mmc]: RMCA OK!
|
|
[191][mmc]: MMC 5.1
|
|
[193][mmc]: HSSDR52/SDR25 8 bit
|
|
[196][mmc]: 50000000 Hz
|
|
[198][mmc]: 29824 MB
|
|
[200][mmc]: ***SD/MMC 2 init OK!!!***
|
|
[281]Loading boot-pkg Succeed(index=0).
|
|
[285][mmc]: b mmc 2 bias 4
|
|
[288]Entry_name = u-boot
|
|
[297]Entry_name = monitor
|
|
[301]Entry_name = dtbo
|
|
[304]Entry_name = optee
|
|
[308]Entry_name = dtb
|
|
[311]tunning data addr:0x4a0003e8
|
|
[315]Jump to second Boot.
|
|
NOTICE: BL3-1: v1.0(debug):54937d5
|
|
NOTICE: BL3-1: Built : 17:44:59, 2021-12-13
|
|
NOTICE: BL3-1 commit: 8
|
|
NOTICE: cpuidle init version V2.0
|
|
NOTICE: secure os exist
|
|
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 81ab7a47 #1 2020年 05月 06日 星期三 02:40:04 UTC arm
|
|
NOTICE: BL3-1: Preparing for EL3 exit to normal world
|
|
NOTICE: BL3-1: Next image address = 0x4a000000
|
|
NOTICE: BL3-1: Next image spsr = 0x1d3
|
|
|
|
U-Boot 2018.07-g5bc6afe0 (Jul 29 2024 - 10:25:16 +0000) Allwinner Technology
|
|
|
|
[00.382]CPU: Allwinner Family
|
|
[00.385]Model: sun50iw9
|
|
I2C: ready
|
|
[00.393]DRAM: 2 GiB
|
|
[00.398]Relocation Offset is: 75ecc000
|
|
[00.440]secure enable bit: 0
|
|
[00.442]smc_tee_inform_fdt failed with: ffffffff
|
|
[00.447]pmu_axp152_probe pmic_bus_read fail
|
|
[00.451]PMU: AXP1530
|
|
FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL
|
|
[00.465]CPU=1416 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=400Mhz
|
|
[00.471]gic: sec monitor mode
|
|
sunxi flash map init
|
|
SPI ALL: ready
|
|
[00.489]flash init start
|
|
[00.491]workmode = 0,storage type = 2
|
|
[00.494][mmc]: mmc driver ver uboot2018:2023-03-21 09:51:00
|
|
[00.500][mmc]: get sdc_type fail and use default host:tm4.
|
|
[00.505][mmc]: get clk_mmc_name string failed
|
|
[00.509][mmc]: get pll0 string failed
|
|
[00.513][mmc]: get pll1 string failed
|
|
[00.516][mmc]: get pll2 string failed
|
|
[00.519][mmc]: SUNXI SDMMC Controller Version:0x40502
|
|
[00.544][mmc]: Best spd md: 4-HS400, freq: 3-100000000, Bus width: 8
|
|
[00.550]sunxi flash init ok
|
|
[00.553]drv_disp_init
|
|
[00.557]handle_num : 7
|
|
erase secure storage failed
|
|
[00.582]sunxi_secure_storage_exit err: secure storage has not been inited
|
|
fdt get node offset faill: lcd1
|
|
[00.597]handle_num : 4
|
|
of_clk_get: index is error,reset it.
|
|
[00.609]handle_num : 2
|
|
[00.614]drv_disp_init finish
|
|
[fd650] show_string: 8888 8
|
|
[00.636]Loading Environment from SUNXI_FLASH... OK
|
|
[00.643]boot_gui_init:start
|
|
FAT: Misaligned buffer address (bbe47ad0)
|
|
[00.649]tcon_tv clk get failed
|
|
[00.764]set disp.fb0_rot_used fail. using defval=0
|
|
[00.768]set disp.fb0_rot_degree fail. using defval=0
|
|
[00.775]boot_gui_init:finish
|
|
[00.782]bmp_name=bootlogo.bmp size 6220856
|
|
secure storage read widevine fail
|
|
[00.845]secure storage read widevine fail with:-1
|
|
secure storage read ec_key fail
|
|
[00.853]secure storage read ec_key fail with:-1
|
|
[00.857]probe MP tools from boot
|
|
delay time 0
|
|
weak:otg_phy_config
|
|
[00.871]usb init ok
|
|
[01.373]usb overtime
|
|
[01.378]usb burn from boot
|
|
delay time 0
|
|
weak:otg_phy_config
|
|
[01.391]usb prepare ok
|
|
[01.694]overtime
|
|
[01.698]do_burn_from_boot usb : no usb exist
|
|
List file under ULI/factory
|
|
** Unrecognized filesystem type **
|
|
[01.713]update part info
|
|
[01.934]update bootcmd
|
|
[01.938]change working_fdt 0xbbe7be50 to 0xbbe49c90
|
|
disable nand error: FDT_ERR_BADPATH
|
|
[01.946][mmc]: get sunxi-mmc2 string failed
|
|
[01.965]update dts
|
|
Hit any key to stop autoboot: 0
|
|
Android's image name: arm64
|
|
ERROR: reserving fdt memory region failed (addr=bbf20000 size=7e9000)
|
|
[02.325]Starting kernel ...
|
|
|
|
[02.328][mmc]: mmc exit start
|
|
[02.346][mmc]: mmc 2 exit ok
|
|
[ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
|
|
[ 0.000000][ T0] Linux version 5.4.125+ (server@server10) (Android (7485623, based on r416183b1) clang version 12.0.7 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.7 (/buildbot/src/android/llvm-r416183/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #10 SMP PREEMPT Wed Jun 11 13:57:00 CST 2025
|
|
[ 0.000000][ T0] Machine model: sun50iw9
|
|
[ 0.000000][ T0] earlycon: uart8250 at MMIO32 0x0000000005000000 (options '')
|
|
[ 0.000000][ T0] printk: bootconsole [uart8250] enabled
|
|
[ 0.004735][ T1] BOOTEVENT: 4.731623: ON
|
|
[ 0.355635][ T1] failed to get standby led pin assign
|
|
[ 0.361301][ T1] failed to get network led pin assign
|
|
[ 0.366982][ T1] failed to get gpio_sdcard_reused assign
|
|
[ 0.373114][ T1] get config err!
|
|
[ 0.415800][ T1] [NAND][NE] Not found valid nand node on dts
|
|
[ 0.425940][ T1] axp2101_pek: axp2101-pek can not register without irq
|
|
[ 0.433604][ T1] sunxi-rtc 7000000.rtc: reset_control_get() failed
|
|
[ 0.456489][ T1] ERROR: pinctrl_get for HDMI2.0 DDC fail
|
|
[ 0.465853][ T1] tv_probe()1574 - of_property_read_string tv_power failed!
|
|
[ 0.631455][ T33] uart uart0: get regulator failed
|
|
[ 0.636818][ T33] uart uart0: uart0 error to get fifo size property
|
|
[ 0.644594][ T33] uart uart1: get regulator failed
|
|
[ 0.652731][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA0
|
|
[ 0.662700][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA1
|
|
[ 0.672607][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA2
|
|
[ 0.682506][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA3
|
|
[ 0.692424][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA4
|
|
[ 0.702318][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA5
|
|
[ 0.712210][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA6
|
|
[ 0.722116][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA7
|
|
[ 0.732021][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA8
|
|
[ 0.741920][ T33] sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA9
|
|
[ 0.753980][ T33] sunxi_ir_startup: get ir protocol failed
|
|
[ 0.761920][ T33] failed to get standby led pin assign
|
|
[ 0.767847][ T33] failed to get network led pin assign
|
|
[ 0.773775][ T33] failed to get gpio_sdcard_reused assign
|
|
[ 0.782253][ T127] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
|
|
[ 0.793858][ T127] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
|
|
[ 0.804350][ T127] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
|
|
[ 0.815070][ T127] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01)
|
|
[ 0.828004][ T1] FD650: fd650_driver_init: FD650 Driver init.
|
|
[ 0.835320][ T1] FD650: NOTE: register_fd650_driver:::register fd650 driver success
|
|
[ 0.852062][ T1] debugfs: Directory 'soc@3000000:codec_plat' with parent 'audiocodec' already present!
|
|
[ 0.864369][ T1] debugfs: Directory '5093000.spdif_plat' with parent 'sndspdif' already present!
|
|
[ 0.876701][ T1] debugfs: Directory 'soc@3000000:ahub1_plat' with parent 'ahubhdmi' already present!
|
|
[ 0.888409][ T1] debugfs: Directory 'soc@3000000:ahub2_plat' with parent 'ahubi2s2' already present!
|
|
[ 0.901983][ T1] get_key_map_info()187 - Failed to find "oe" in dts.
|
|
[ 0.909575][ C0] sunxi-i2c sunxi-i2c5: SLA+W has been transmitted; ACK not received
|
|
[ 0.918479][ T1] sunxi-i2c sunxi-i2c5: engine-mode: xfer failed(dev addr:0x10)
|
|
[ 0.926859][ T1] [ac200] get ave_regulator_name failed!
|
|
[ 0.933174][ T1] [ac200] pwm enable
|
|
[ 0.965495][ T1] Kernel init done
|
|
[ 1.303253][ T1] init: Could not update logical partition
|
|
[ 1.566871][ T1] init: Could not set 'ro.boot.dynamic_partitions' to 'true' while loading .prop filesRead-only property was already set
|
|
[ 1.580898][ T1] init: Could not set 'ro.boot.dynamic_partitions_retrofit' to 'true' while loading .prop filesRead-only property was already set
|
|
[ 1.711602][ T1] cgroup1: Unknown subsys name 'blkio'
|
|
[ 1.721086][ T1] cgroup1: Unknown subsys name 'memory'
|
|
[ 2.202444][ T167] sunxi-rfkill soc@3000000:rfkill: get gpio power_en failed
|
|
[ 2.210923][ T167] sunxi-rfkill soc@3000000:rfkill: get gpio bt_rst failed
|
|
console:/ $ [ 5.545659][ T192] logd: Cannot read /data/misc/logd/event-log-tags
|
|
[ 5.553917][ T192] logd: FrameworkListener: read() failed (Connection reset by peer)
|
|
[ 5.997769][ T245] cutils-trace: Error opening trace file: No such file or directory (2)
|
|
Gatekeeper_TA_CreateEntryPoint
|
|
[ 7.012125][ T167] sdiohal err: sdio, BITS =64, PageSize =4096, order=6, 3
|
|
[ 7.053875][ T167] uwe5621_bt_tty_init
|
|
[ 7.059440][ T167] mtty_probe unisoc soc, continue
|
|
[ 7.065435][ T167] rfkill_bluetooth_init
|
|
[ 7.070578][ T167] rfkill_bluetooth_init end
|
|
[ 7.075494][ T167] marlin_sdio_init
|
|
[ 14.165738][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
|
|
[ 14.173798][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 7, RTO !!
|
|
[ 14.181428][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 7, RTO !!
|
|
[ 14.189015][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 7, RTO !!
|
|
[ 14.196575][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 7, RTO !!
|
|
[ 14.230382][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
|
|
[ 14.242392][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !!
|
|
[ 14.284742][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 53, WR DCE !!
|
|
[ 14.293007][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 53, WR DCE !!
|
|
[ 14.301240][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 53, WR DCE !!
|
|
[ 14.309575][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 53, WR DCE !!
|
|
[ 14.623776][ T659] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
|
|
[ 14.658261][ T659] wifi ini path = /vendor/etc/wifi_56630001_3ant.ini
|
|
[ 14.669391][ T659] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
|
|
[ 14.680666][ T659] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
|
|
[ 14.702646][ T659] sprdwl:sprdwl_get_fw_info, drv_version=1, fw_version=2, compat_ver=0
|
|
[ 14.718345][ T659] sprdwl:chip_model:0x2355, chip_ver:0x0
|
|
[ 14.725407][ T659] sprdwl:fw_ver:0, fw_std:0x53, fw_capa:0x120f4f
|
|
[ 14.732681][ T659] sprdwl:mac_addr:b4:2f:03:15:e8:b9
|
|
[ 14.739329][ T659] sprdwl:credit_capa:TX_WITH_CREDIT, extend_feature:0x1
|
|
[ 14.747459][ T659] sprdwl:ott support:1
|
|
[ 14.855837][ T247] get_key_map_info()187 - Failed to find "oe" in dts.
|
|
[ 14.881132][ T659] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0
|
|
[ 14.910993][ T659] unisoc_wifi unisoc_wifi wlan1: netif_napi_add() called with weight 128
|
|
[ 16.246910][ T279] bluetooth_set_power: start_block=0
|
|
[ 16.253151][ T279] bluetooth_set_power: end_block=0
|
|
[ 16.396873][ T347] recv_kernel_event address b4:2f:03:15:73:2f
|
|
[ 17.671839][ T315] audit: rate limit exceeded
|
|
[ 17.773592][ T167] debugfs: Directory 'sunxi-ehci' with parent 'ehci' already present!
|
|
[ 17.821574][ T167] debugfs: Directory 'sunxi-ehci' with parent 'ehci' already present!
|
|
[ 17.865587][ T167] debugfs: Directory 'sunxi-ehci' with parent 'ehci' already present!
|
|
[ 18.019597][ T167] debugfs: Directory 'sunxi-ohci' with parent 'ohci' already present!
|
|
[ 18.125709][ T167] debugfs: Directory 'sunxi-ohci' with parent 'ohci' already present!
|
|
[ 18.207399][ T167] debugfs: Directory 'sunxi-ohci' with parent 'ohci' already present!
|
|
[ 20.310241][ T1351] audit: rate limit exceeded
|
|
[ 21.416237][ T1448] audit: rate limit exceeded
|
|
[ 22.423633][ T476] audit: rate limit exceeded
|
|
[ 23.468467][ T1603] audit: rate limit exceeded
|
|
[ 24.491559][ T1346] audit: rate limit exceeded
|
|
[ 25.908847][ T1964] audit: rate limit exceeded
|
|
[ 26.960313][ T2091] audit: rate limit exceeded
|
|
[ 28.332516][ T2199] audit: rate limit exceeded
|
|
[ 29.874228][ T2331] audit: rate limit exceeded
|
|
^C
|
|
130|console:/ $ [ 34.996878][ T2392] audit: rate limit exceeded
|
|
[ 35.732940][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.813141][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.833096][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.853923][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.869944][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.889621][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.904315][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.929658][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.949258][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.964419][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.977315][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 35.992551][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.005351][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.017984][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.811936][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.888285][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.914174][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.929204][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.944292][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.958768][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 36.980858][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 37.836797][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 37.852508][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 37.879099][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 37.937546][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 37.951775][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 37.964786][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 38.816956][ T2391] audit: rate limit exceeded
|
|
[ 39.959122][ T1860] audit: rate limit exceeded
|
|
[ 40.923797][ T347] Send upper Vendor Specific event.
|
|
[ 41.033810][ T2708] audit: rate limit exceeded
|
|
[ 42.189913][ T2778] audit: rate limit exceeded
|
|
[ 45.250874][ T2777] audit: rate limit exceeded
|
|
[ 90.256021][ T2390] audit: rate limit exceeded
|
|
[ 90.716796][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.754000][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.773858][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.789288][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.803923][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.819854][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.833375][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.864247][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.881198][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.896823][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 90.918806][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.727836][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.742415][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.780149][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.801155][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.816325][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.849229][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.864054][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.877347][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.903029][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.916171][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 91.929603][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.755927][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.780309][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.795349][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.807812][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.820054][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.832797][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.845228][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.857442][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.870220][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.928311][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 92.944271][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 93.980212][ T3142] audit: rate limit exceeded
|
|
[ 96.234010][ T3233] audit: rate limit exceeded
|
|
[ 99.190178][ T3247] audit: rate limit exceeded
|
|
[ 99.297515][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.310059][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.343671][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.374211][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.387371][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.400298][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.412767][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.425162][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.437600][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.450056][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.462407][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.480546][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.496697][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.509022][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.522272][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 99.555404][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 100.343571][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 100.405114][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 100.423855][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 100.460221][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 100.490444][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.354328][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.367094][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.383829][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.428806][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.442531][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.456435][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.469005][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.486554][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.516212][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.532344][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.544689][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
|
[ 101.557316][ T780] sprdwl:sprdwl_rx_rsp_process ctx_id 0 recv rsp[WIFI_CMD_TX_DATA] status[SPRDWL_CMD_STATUS_ERROR]
|
